|
|
Post by sd51555 on Sept 7, 2021 13:38:40 GMT -6
So the saga of my griddle rolls on. I've found out the male end on my griddle is 9/16" United National Fine Thread. I'm trying to figure out if there is a way to adapt this to a 3/8" flare fitting on my gas line. Anyone ever heard of such a thing, or where I may go to search for these parts?
|
|
|
|
Post by Reagan on Sept 7, 2021 13:49:57 GMT -6
Did you check with Parker Hannifin?
|
|
|
|
Post by wklman on Sept 7, 2021 14:18:57 GMT -6
There's gotta be something out there that'll adapt to it.
|
|
|
|
Post by wklman on Sept 7, 2021 14:21:31 GMT -6
|
|
|
|
Post by sd51555 on Sept 7, 2021 14:26:01 GMT -6
Did you check with Parker Hannifin? I called a parker store in MN after you mentioned that. They said they don't deal in any of that. |
|
|
|
Post by sd51555 on Sept 7, 2021 14:33:26 GMT -6
There's gotta be something out there that'll adapt to it. I think I just figured it out. I found an outfit in Missouri that makes an adapter for a quick connect hose. They could make me a custom hose, but they cant' get parts due to the great reset. However, Amazon has them, and I just ordered up one of these. I think I can screw out the quick connect and screw in what I need. I think the last problem I may run into is whatever fitting is on that quick connect, if it's pipe thread or flair fitting.  |
|
|
|
Post by sd51555 on Sept 7, 2021 14:35:55 GMT -6
scratch that last post. I found it! Now I just need to rectify that hose length issue. That'll be cake compared to this bullshit.  |
|
|
|
Post by sd51555 on Sept 7, 2021 14:54:11 GMT -6
I feel dirty for doing it, but I was out of options. Amazon had it all.  |
|
|
|
Post by loshonhora on Sept 8, 2021 5:35:22 GMT -6
|
|
|
|
Post by sd51555 on Sept 8, 2021 6:05:29 GMT -6
The gas line I'm hooking it up to is already low pressure from the 2nd stage regulator on the cabin. I have to get rid of the regulator that came with it so I can get proper gas pressure to the griddle. Bottle or cylinder gas is higher pressure and requires those inline regulators. |
|
|
|
Post by sd51555 on Sept 9, 2021 12:01:48 GMT -6
This is the missing link.  |
|
|
|
Post by sd51555 on Sept 10, 2021 20:44:46 GMT -6
Done. Twice the flame now. Even fire shaved my right hand.  |
|
